Immunoasssay based on the antibody-conjugated PAMAM-dendrimer-gold quantum dot complex

An immunoassay based upon photoluminescent gold quantum dots aimed at detecting human IgG in aqueous solution from micromolar to nanomolar concentrations is described.     

New and efficient synthesis of azabicyclo[4.4.0]alkane amino acids by Rh-catalyzed cyclohydrocarbonylation

[reaction: see text] Highly efficient syntheses of azabicyclo[4.4.0]alkane amino acids were achieved by Rh-catalyzed cyclohydrocarbonylation of dipeptides bearing a terminal olefin moiety and a heteroatom nucleophile.     

Production of l-DOPA by tyrosinase immobilized on modified polystyrene

Mushroom tyrosinase was immobilized on modified polystyrene—polyaminostyrene (PSNH) and polymethylchloridestyrene (PSCL)—to produce l-DOPA from l-tyrosine. Glutaraldehyde was used as an activating agent for the PSNH to immobilize the tyrosinase and 10% (w/v) glutaraldehyde was optimal in conferring the highest specific activity (11.96 U/g) to the PSNH. Methylchloride on the PSCL was directly linked with the tyrosinase, and 1.5 mmol of Cl/g was optimal in attaining the specific activity of 17.0 U/g. The temperature and optimal acidity were, respectively, 60°C and pH 5.5 for the PSNH, and 70°C and pH 3.0 for the PSCL. In a 50-mL batch reactor working over 36 h, the l-DOPA production rate at 30°C was 1.44 mg/(L·h) for the PSNH and 2.33 mg/(L·h) for the PSCL. The production rate over 36 h was 3.86 mg/(L·h) for the PSNH at 60°C and 5.54 mg/(L·h) for the PSCL at 70°C. Both of the immobilized enzymes showed a remarkable stability with almost no change in activity after being stored wet. The operational stability study indicated a 22.4% reduction in l-DOPA production for the PSNH and an 8.63% reduction for the PSCL over seven runs (each run was for 144h at 30°C) when the immobilized enzymes were used under turnover conditions. The immobilized tyrosinase was more stable on the PSCL than on the PSNH.     

Efficient beam-propagation method based on Padé approximants in the propagation direction

We propose a novel beam-propagation method (BPM) based on the higher-order Padé approximants in both the transverse and the longitudinal directions. Extending the Padé approximation to the propagation direction and adopting the multistep method increase the programming effort by only a small amount. Compared with the conventional BPM's, this method is more accurate and efficient. The accuracy and the propagation step size are well predicted by a phase analysis.     

Pretilt angle of liquid crystals and liquid-crystal alignment on microgrooved polyimide surfaces fabricated by soft embossing method

In this study, the soft embossing method is proposed to fabricate periodical microgrooved structure on polyimide surfaces. These microgrooved polyimide surfaces are assembled to form liquid-crystal cells. It is found that the director of liquid crystals uniformly aligns along the groove direction even when the groove width is as high as 3 microm. The anchoring energy of these microgrooved polyimide surfaces is higher than that of the typical rubbed surfaces. The pretilt angle of liquid crystals is adjusted by tuning the surface polarity of the polyimide alignment layer, which is identified by the advancing contact angle of water. The surface polarity of polyimide alignment layers is manipulated by simply mixing two kinds of polyimide: a more hydrophilic one and a more hydrophobic one. It is found that the pretilt angle of liquid crystals increases along with the advancing contact angle of water on the alignment layer under the condition of a fixed surface topography.     

Reaction of Cl with CD4 excited to the second C-D stretching overtone

The effects of vibrational excitation on the Cl+CD(4) reaction are investigated by preparing three nearly isoenergetic vibrational states: mid R:3000 at 6279.66 cm(-1), |2100> at 6534.20 cm(-1), and |1110> at 6764.24 cm(-1), where |D(1)D(2)D(3)D(4)> identifies the number of vibrational quanta in each C-D oscillator. Vibrational excitation of the perdeuteromethane is via direct infrared pumping. The reaction is initiated by photolysis of molecular chlorine at 355 nm. The nascent methyl radical product distribution is measured by 2+1 resonance-enhanced multiphoton ionization at 330 nm. The resulting CD(3) state distributions reveal a preference to remove all energy available in the most excited C-D oscillator. Although the energetics are nearly identical, the authors observe strong mode specificity in which the CD(3) state distributions markedly differ between the three Cl-atom reactions. Reaction with CD(4) prepared in the |3000> mode leads to CD(3) products populated primarily in the ground state, reaction with CD(4) prepared in the |2100> mode leads primarily to CD(3) with one quantum of stretch excitation, and reaction with CD(4) prepared in the |1110> mode leads primarily to CD(3) with one quantum of C-D stretch excitation in two oscillators. There are some minor deviations from this behavior, most notably that the Cl atom is able to abstract more energy than is available in a single C-D oscillator, as in the case of |2100>, wherein a small population of ground-state CD(3) is observed. These exceptions likely result from the mixings between different second overtone stretch combination bands. They also measure isotropic and anisotropic time-of-flight profiles of CD(3) (nu(1)=1,2) products from the Cl+CD(4) |2100> reaction, providing speed distributions, spatial anisotropies, and differential cross sections that indicate that energy introduced as vibrational energy into the system essentially remains as such throughout the course of the reaction.     

Determination of remoxipride in human plasma and urine by reversed-phase ion-pair high-performance liquid chromatography.

A sensitive method is described for the measurement of remoxipride in human plasma and urine. Remoxipride and its internal standard are extracted from plasma or urine at pH 12 with a mixture of hexane and methyl tert.-butyl ether. After washing the organic phase with base, the compounds are extracted into acid and analyzed on a C18 column with ultraviolet detection at 214 nm. The mobile phase is composed of acetonitrile and aqueous buffer (sodium perchlorate and phosphoric acid, pH 1.7). The limits of reliable quantitation for remoxipride are 12.5 and 50 ng/ml for plasma and urine, respectively. The run times are 6 min for plasma and 3 min for urine. The method has been successfully used to assay remoxipride clinical study samples. This mobile phase has also been successfully applied to the analysis of other basic drugs such as cimetidine, codeine, diltiazem and quinidine with minor modifications.     

Synergistic antitumor effect of curcumin and dinitrosyl iron complexes for against melanoma cells

The aim of this study was to examine whether combining curcumin, a chemoprevention agent, and dinitrosyl iron complexes (DNICs) would have a synergistic cytotoxic effect on mouse melanoma B16-F10 cells in vitro. Three synthesized DNICs-[PPN] [(NO)₂Fe(SCH₂CONHCH₃)₂] (NC01), [PPN] [(NO)₂Fe(SCH₂CON(CH₃)₂)₂] (NC02), and [Na][(NO)₂Fe(SCH₂CON(CH₃)₂)₂] (NC03) were tested in this study. In vitro DNA cleavage assay showed all three DNICs could cause plasmid DNA damage through releasing NO under UV irradiation. The cytotoxicity assay demonstrated these DNICs were toxic to B16-F10 cells in vitro, and the estimated values of LD₅₀ (24 h of incubation) of NC01 and NC02 were 1 μM, while the values of LD₅₀ of NC03 was 200 μM. No synergistic cytotoxicity effect was noted in the treatments of the combinations of curcumin and DNICs. On the contrary, in the presence of NC03, the toxicity of curcumin was reduced. Using UV-Visible spectroscopy and fluorescence microscopy, we found NC03 might interact with curcumin and reduce the accumulation of curcumin in cells. Further experiments using the pretreatment of curcumin for 4 h followed by the treatment of NC03 showed the synergistic cytotoxic effect, while, the pretreatment of NC03 followed by the treatment of curcumin did not have any effect. This study provides the basis for further investigation on the effects of combinations of curcumin and other NO donors.     

Tritium content as indicator of environmental character on Taiwan Island

Environmental characters have been established by tritium contents in well water, coastal seawater and reservoir water collected from various places around Taiwan island. Tritium concentrations of samples were detected by a liquid scintillation analyzer TRI-CARB-LSC 2550 TR mode, with a low level standard quench curve. After samples were concentrated by electrolysis, tritium concentration was detected in optimum conditions of LLLSA. An electrolytic enrichment technique was also developed with a eurrent density of 100 mA/cm² and 0.4–0.6% (Na₂O₂) electrolyte in concentrated samples. Data observed show a lower tritium concentration for coastal seawater than for wells in the same area. The tritium concentration ratio of well and coastal seawater on the western side of Taiwan is 4.000 and on the eastern side 5.801. Tritium content of reservoir water is related to the logarithm of effective volume capacity.